For your perusal is an assortment of small planes and spokeshaves, the latter of which are actually small specialty planes themselves (or at least function as one). The green plane is a Kunz #100 made in Germany; the middle plane is a Lee Valley copy of the Stanley #100 1/2, with a curved sole, made in Canada; and the last plane is a Lee Valley copy of the Bailey/Stanley #50 Little Victor plane, which caused quite a stir when first introduced a little over a decade ago. The small brass spokeshaves are no longer produced, but occasionally turn up on fleabay. If I remember correctly they was sold by Garret Wade, and were made by a small manufacturer in Detroit.
This “Squirrel Tail” plane is just about an exact copy of the old Stanley #100. It has a flat sole, and is excellent for trimming and general work with small or green stock. It lives in my green woodworking tool bucket, as the red paint makes it easy to find should I lose it in the woods. The price is also right for a German made plane.
Lee Valley Squirrel-Tail Palm Plane
This is only one of the superb palm planes manufactured by Lee Valley in Canada. A take off on the Stanley #100 1/2 plane, this has three major improvements. The materials are far superior, the design is more useful, and the machining is about the best there is. To be specific, the handle is larger to accommodate the overgrown beasts that we have become. The blade adjustment is based on the old Victor plane adjustment–more on that in a second. The machining matches that of the innovations introduced with the LV Little Victor plane.
The curved sole makes this ideal for chair makers, though it works just as well on large carved bowls. The Stanley #100 1/2 was marketed as a “modelmaker’s convex plane.” The ease of adjustment on this new model is mind blowing, circa 1877.
Lee Valley Little Victor Plane
This is not an exact copy of the 1877 Bailey #50 Little Victor plane, but it is pretty close. Leonard Bailey introduced a newly designed set of planes that year, under the Victor name. A series of lawsuits with Stanley, Bailey’s former employer, resulted in Stanley gaining the rights to the designs. They promptly canceled the entire line of planes.
When introduced, this little plane was considered a marvel. Both the sole and the blade are machined practically literally flat, to the point that the plane could be used right out of the box. One woodworking magazine editor had the entire staff convinced they should order one the day he received it. They all did.
So it is small, but it is fierce. I used this extensively while I built the “great wall” in the previous post, and it qualifies as the leader in the race for the perfect pocket plane. Nothing is better at trimming pieces of millwork.
Project too small or curvy for a mini-plane? Look for some of these little brass planes, in used condition, on the interwebs. The set has one with a flat sole, and two with varying degrees of concave-convex-osity.
I use mine constantly when carving spoons, and even when making bowls. They hang in a leather pouch I made just for these three, right next to my shaving horse, which is spoon carving central.
Here is a definite case where bigger is not better. These take up almost no space in the workshop, and if needed the whole set could fit in a tool belt. For someone who has a shop as buried in shavings as mine always is, they also create small shavings that are easy to clean up, for those of you who actually clean up your shop occasionally.